China High Tensile Welded Short Ring Chain MID Ring Chain Long Ring Chain Lifting Chain Fishing Net Chain manufacturer

Product Description

Higher Tensile Welded Brief Ring Chain Mid Ring Chain Long Ring Chain Lifting Chain Fishing Internet Chain

PRDUCT Identify

fishing internet chains

STHangZhouRD

EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.

Dimensions

6MM-22MM

24MM-30MM

Content

25MnV OR 20Mn2

23MnNiMoCr54

Toughness quality

G43,G63,G70,G80

Elongation of chain breaking

≥ 16%

CONTAINER

1×20 GP

2×20 GP

3×20 GP

4×20 GP

Shipping and delivery

30days

45days

60days

75days

PACKING

Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet

Software

welded lifting chain is employed for overhead lifting ,dragging ,chain slings and so on 

Complete

Self-coloured,Paint,Black,Galvanized,Yellow.

OEM

Accepct.

MOQ

1-5t according to the dimension you need.

Mark

G43,G63,G70,G80 each twenty back links or in accordance to your requirements.

Technological procedure

slicing- heating- bending -flash welding – trimming -stud location – heat treatment method -evidence tests -breaking tests – shot blasting- surface area completed -packing.

 

 

 

Gain

one.Higher and homogen tensile toughness

2.Exellent core ducitility

three.Lengthy provider life

four.Security factor: Min.4:one

5.Do 2.4 instances of WLL manufacturing validation energy tensile test.

Specification:

Course

Specification

(d x p)

Diameter 

(d)

Width 

(mm)

Excess weight

Min. Breaking Load

(mm)

(mm)

Min (a)

Max(b)

( kg/m)

( KN )

 

 

 

Short 

Ring 

Chain

7×21

7

ten

25.5

one.ten

53

10×30

10

fourteen

36.

two.twenty

109

13×39

thirteen

18.one

47.1

three.80

172

16×48

sixteen

22.four

fifty seven.four

five.70

281

19×57

19

27.8

sixty eight.8

eight.00

397

20×60

20

29.

seventy two.

nine.00

440

 

 

 

 

Mid.

Ring 

Chain

10×40

ten

fifteen.

37.

two.00

109

13×52

13

19.5

forty eight.5

three.forty

172

14×50

fourteen

twenty.five

49.5

4.04

215

16×64

sixteen

24.

59.

5.04

281

19×76

19

28.5

sixty nine.5

7.twelve

397

22×86

22

27.

seventy four.

9.forty

532

26×92

26

31.

86.

13.70

743

 

 

 

 

 

Long

Ring

Chain

7×45

seven

10.

25.5

.83

53

9×53

9

fifteen.

35.

1.forty

89

11×63

11

18.

43.

2.eighteen

132

13×80

13

22.

fifty one.

two.ninety seven

172

16×100

sixteen

26.

sixty one.

four.44

281

19×100

19

27.

68.

6.fifty

397

22×120

22

37.

eighty four.

8.seventy six

532

28×150

28

44.

103.

fourteen.thirteen

860

Our advantages
1. Have a complete rigorous administration, generation and inspection procedures to handle the quality and avoid depth miscalculation
2. Layout and create ability
three. Arduous inspection such as incoming inspection, flaw detection and so on., and double examine is a must.
four. Superior manufacturing unit facility make sure
five. Response to any inquiry within 24 HRS with style or successful resolution from our engineer or tech supporter.
six. Offer specialist customization service according to client’s needs
seven. on time shipping and delivery, as we have arduous manufacturing plan and job stick to-up process
eight. Moderate price and specialist support

If you have any concern or inquiry, make sure you truly feel free of charge to contact us for a lot more particulars.
Ms Kate
 
 
Website: weitongmarine

Merchandise Images

 

US $700-1,000
/ Ton
|
2 Tons

(Min. Order)

###

Usage: Fishing Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 6-34mm Diameter
Structure: Welded Chain

###

Customization:

###

PRDUCT NAME
fishing net chains
STANDARD
EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.
SIZE
6MM-22MM
24MM-30MM
MATERIAL
25MnV OR 20Mn2
23MnNiMoCr54
Strength grade
G43,G63,G70,G80
Elongation of chain breaking
≥ 16%
CONTAINER
1×20 GP
2×20 GP
3×20 GP
4×20 GP
DELIVERY
30days
45days
60days
75days
PACKING
Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
APPLICATION
welded lifting chain is used for overhead lifting ,dragging ,chain slings and so on 
FINISH
Self-colored,Paint,Black,Galvanized,Yellow.
OEM
Accepct.
MOQ
1-5t according to the size you need.
Mark
G43,G63,G70,G80 each 20 links or according to your requirements.
Technological process
cutting- heating- bending -flash welding – trimming -stud setting – heat treatment -proof testing -breaking testing – shot blasting- surface finished -packing.
 
 
 

ADVANTAGE

1.High and homogen tensile strength
2.Exellent core ducitility
3.Long service life
4.Safety factor: Min.4:1
5.Do 2.4 times of WLL manufacturing validation strength tensile test.

###

Class
Specification
(d x p)
Diameter 
(d)
Width 
(mm)
Weight
Min. Breaking Load
(mm)
(mm)
Min (a)
Max(b)
( kg/m)
( KN )
 
 
 
Short 
Ring 
Chain
7×21
7
10
25.5
1.10
53
10×30
10
14
36.0
2.20
109
13×39
13
18.1
47.1
3.80
172
16×48
16
22.4
57.4
5.70
281
19×57
19
27.8
68.8
8.00
397
20×60
20
29.0
72.0
9.00
440
 
 
 
 
Mid.
Ring 
Chain
10×40
10
15.0
37.0
2.00
109
13×52
13
19.5
48.5
3.40
172
14×50
14
20.5
49.5
4.04
215
16×64
16
24.0
59.0
5.04
281
19×76
19
28.5
69.5
7.12
397
22×86
22
27.0
74.0
9.40
532
26×92
26
31.0
86.0
13.70
743
 
 
 
 
 
Long
Ring
Chain
7×45
7
10.0
25.5
0.83
53
9×53
9
15.0
35.0
1.40
89
11×63
11
18.0
43.0
2.18
132
13×80
13
22.0
51.0
2.97
172
16×100
16
26.0
61.0
4.44
281
19×100
19
27.0
68.0
6.50
397
22×120
22
37.0
84.0
8.76
532
28×150
28
44.0
103.0
14.13
860
US $700-1,000
/ Ton
|
2 Tons

(Min. Order)

###

Usage: Fishing Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 6-34mm Diameter
Structure: Welded Chain

###

Customization:

###

PRDUCT NAME
fishing net chains
STANDARD
EN818-2,GB/T20652,GB/T12718,GB/T20946,DIN5685.
SIZE
6MM-22MM
24MM-30MM
MATERIAL
25MnV OR 20Mn2
23MnNiMoCr54
Strength grade
G43,G63,G70,G80
Elongation of chain breaking
≥ 16%
CONTAINER
1×20 GP
2×20 GP
3×20 GP
4×20 GP
DELIVERY
30days
45days
60days
75days
PACKING
Plywood reel/plastic reel/plastic drum/gunny bag/iron drum+plywood pallet/iron pallet
APPLICATION
welded lifting chain is used for overhead lifting ,dragging ,chain slings and so on 
FINISH
Self-colored,Paint,Black,Galvanized,Yellow.
OEM
Accepct.
MOQ
1-5t according to the size you need.
Mark
G43,G63,G70,G80 each 20 links or according to your requirements.
Technological process
cutting- heating- bending -flash welding – trimming -stud setting – heat treatment -proof testing -breaking testing – shot blasting- surface finished -packing.
 
 
 

ADVANTAGE

1.High and homogen tensile strength
2.Exellent core ducitility
3.Long service life
4.Safety factor: Min.4:1
5.Do 2.4 times of WLL manufacturing validation strength tensile test.

###

Class
Specification
(d x p)
Diameter 
(d)
Width 
(mm)
Weight
Min. Breaking Load
(mm)
(mm)
Min (a)
Max(b)
( kg/m)
( KN )
 
 
 
Short 
Ring 
Chain
7×21
7
10
25.5
1.10
53
10×30
10
14
36.0
2.20
109
13×39
13
18.1
47.1
3.80
172
16×48
16
22.4
57.4
5.70
281
19×57
19
27.8
68.8
8.00
397
20×60
20
29.0
72.0
9.00
440
 
 
 
 
Mid.
Ring 
Chain
10×40
10
15.0
37.0
2.00
109
13×52
13
19.5
48.5
3.40
172
14×50
14
20.5
49.5
4.04
215
16×64
16
24.0
59.0
5.04
281
19×76
19
28.5
69.5
7.12
397
22×86
22
27.0
74.0
9.40
532
26×92
26
31.0
86.0
13.70
743
 
 
 
 
 
Long
Ring
Chain
7×45
7
10.0
25.5
0.83
53
9×53
9
15.0
35.0
1.40
89
11×63
11
18.0
43.0
2.18
132
13×80
13
22.0
51.0
2.97
172
16×100
16
26.0
61.0
4.44
281
19×100
19
27.0
68.0
6.50
397
22×120
22
37.0
84.0
8.76
532
28×150
28
44.0
103.0
14.13
860

drive chain type

Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.

time chain

There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.
chain

pin chain

Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.

Engineering Steel Chain

Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.

Bushing Roller Chain

Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
chain

flat top chain

The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.

China High Tensile Welded Short Ring Chain MID Ring Chain Long Ring Chain Lifting Chain Fishing Net Chain     manufacturer China High Tensile Welded Short Ring Chain MID Ring Chain Long Ring Chain Lifting Chain Fishing Net Chain     manufacturer
editor by czh 2022-12-30

drive chains

As one of leading drive chains manufacturers, suppliers and exporters of mechanical products, We offer drive chains and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of drive chains.

Recent Posts