China Kgg Cable Drag Chains for Construction Machinery Hc55 Series a2040 roller chain

Item Description

Cable Provider

KGG gives 5 series of vitality chains to satisfy buyer needs. 

What is the cable chain?

Cable chain is utilised to have and protect cables, hydraulics, pneu-   matics and other hoses. It regulates the movement of hoses to defend them from intertwining, twisting and hurt. Cable chain is mixed by flexible rotating backlinks, extensively employed in where mobile energy supply required, such as machine equipment, crane, development machinery, cutting and welding equipment, electronics, warehousing logistics  equipment,  transportation  equipment,  injection  molding industry, car manufacturing, steel mill…

Rewards of cable chain program:

one. Versatile applications, not only for cables but also for all hoses (cables, optical cables, hydraulics, pneumatics and many others.)
2. Nearly maintenance free of charge, secure and dependable, widly used 
three. Modular style, simple to assemble and maintain
four. In contrast with sliding contact line, cable chain program is a lot more steady, safe and dependable
5. In comparison with cable reel, no rigidity prerequisite on cables, reducing cable value, defending cables, growing life time
6. In comparison with cable pulling, optimum 50 percent cable price saved and much less set up area

Specification Listing

 

Opening theory Series Interior height[mm] Outer peak[mm] Interior width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill weight [kg/m] Max unsupported size [m] Max long travel duration [m] Material of Mounting brackets
                  Plastic Steel
MC is Non snap-open. ME is Permit to open from 1 facet MC·ME10-fifteen 10-15 fourteen-19 ten – 50 17 – fifty eight 18 – 38 twenty .7-1.two .8-1.4 40 /  
ME20-32 20-32 twenty five-39 15 – eighty 26 – 91 28 – one hundred eighty 30 1.five 1.4 fifty /  
QC Break up crossbar 1 side QC20 20 twenty five 25 – 50 36 – sixty one 28 – a hundred 30 .five .sixty five /
QC32 32 39 twenty five – 50 36 – 61 fifty – one hundred twenty five 30 .7 1 /
HC Snap-open up from the two aspect HC20 20.00 30.00 20 – one hundred twenty five 34 – 139 35 – a hundred and eighty 33 five two.6 a hundred and twenty /  
HC25 25.00 36.00 20 – a hundred twenty five 37 – 142 50 – 200 40 10 two.8 a hundred and fifty /  
HC35 35.00 56.00 fifty – 400 seventy four – 424 60 – 250 60 twenty five three.4 two hundred /  
HC45 45.00 66.00 50 – 400 76 – 426 75 – 300 70 38 three.nine 250 /  
HC55 fifty five.00 77.00 50 – 400 eighty – 430 one hundred twenty five – four hundred 70 forty five 4 250   /
HC60 sixty.00 87.00 100 – five hundred 134 – 534 a hundred thirty five – four hundred ninety sixty five five three hundred   /
HC80 eighty.00 108.00 one hundred – 500 150 – 550 one hundred fifty – five hundred 90 sixty eight 6 300   /
HT Tube, snap-open from equally sides HT20 twenty thirty 40 – one hundred fifty four – 114 75 – a hundred and eighty 33 five two.six one hundred twenty /  
HT25 twenty five 36 40 – 100 fifty seven – 117 75 – 200 40 10 2.eight one hundred fifty /  
HT35 35 fifty six 50 – four hundred seventy four – 424 one hundred twenty five – 250 sixty 25 3.four two hundred /  
HT45 forty five 66 fifty – four hundred 76 – 426 a hundred twenty five – 300 70 38 3.nine 250 /  
HT55 55 77 fifty – four hundred eighty – 430 one hundred fifty – 400 70 forty five 4 250   /
HT60 sixty 87 one hundred – five hundred 134 – 534 a hundred and fifty – 400 90 sixty five 5 three hundred   /
HT80 eighty 108 a hundred – 500 a hundred and fifty – 550 two hundred – 500 90 68 six three hundred   /
XC Open up, snap-open up from the two sides XC30 30 40 20 – 125 36 -141 55 – two hundred 25 3 1.six 50 /  
EC Open, snap-open from equally sides EC35 35 50 20 – a hundred twenty five 37 – 142 75 – 250 33 8 2.two 50 /  
ET Tube, snap-open from both sides ET35 35 50 50 – 125 67 – 142 75 – 250 33 8 2.two 50 /  

Factory Comprehensive PROCESSING Pictures

Higher High quality Handle Program

 FAQ

one. Why decide on CZPT China?

More than the past seventeen a long time, CZPT has usually insisted that “items and solutions” start from Japanese sector expectations,getting ZheJiang expectations as the bottom line, actively make investments in the improvement of new transmission components and self-experiment and examination. With the support tenet of “exceeding buyer anticipations”, build a “trusted” partnership.

two. What is your primary items ?

We are a leading maker and distributor of linear movement elements in China. Specifically miniature dimensions of Ball Screws and Linear Actuators and linear movement guideways. Our brand “KGG” stands for ” Know-how,” ” Great High quality,” and ” Good worth” and our manufacturing unit is found in the most sophisticated metropolis in China: ZheJiang with the best equipment and advanced technological innovation, totally stringent quality manage program. Our aim is to source world leader course linear movement components but with most affordable price tag in the globe.

3. How to Personalized-created (OEM/ODM)?

If you have a solution drawing or a sample, you should send out to us, and we can custom-manufactured the as your essential. We will also offer our professional advices of the products to make the design to be more recognized & optimize the efficiency.

four. When can I get the quotation?

We usually estimate in 24 hrs following we get your inquiry. If you are extremely urgent to get the cost,please call us or notify us in your electronic mail so that we will regard your inquiry priority.

5. How can I get a sample to check out the top quality?

Right after affirmation of our quoted price, you can area the sample order. The sample will be started following you indication again our comprehensive specialized file.

6. What is your payment phrases?

Our payment phrases is 30% deposit,balance 70% just before shipment.

To Be Negotiated 1 Piece
(Min. Order)

###

Logo Printing: with Logo Printing
Size: Various Models
Customized: Non-Customized
Type: Cable Carrier
Material: Steel
Certification: ISO 9001:2008, ISO 9001:2000

###

Customization:

###

Opening principle Series Inner height[mm] Outer height[mm] Inner width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill weight [kg/m] Max unsupported length [m] Max long travel length [m] Material of Mounting brackets
                  Plastic Steel
MC is Non snap-open. ME is Enable to open from one side MC·ME10-15 10-15 14-19 10 – 50 17 – 58 18 – 38 20 0.7-1.2 0.8-1.4 40 /  
ME20-32 20-32 25-39 15 – 80 26 – 91 28 – 180 30 1.5 1.4 50 /  
QC Split crossbar one side QC20 20 25 25 – 50 36 – 61 28 – 100 30 0.5 0.65 /
QC32 32 39 25 – 50 36 – 61 50 – 125 30 0.7 1 /
HC Snap-open from both side HC20 20.00 30.00 20 – 125 34 – 139 35 – 180 33 5 2.6 120 /  
HC25 25.00 36.00 20 – 125 37 – 142 50 – 200 40 10 2.8 150 /  
HC35 35.00 56.00 50 – 400 74 – 424 60 – 250 60 25 3.4 200 /  
HC45 45.00 66.00 50 – 400 76 – 426 75 – 300 70 38 3.9 250 /  
HC55 55.00 77.00 50 – 400 80 – 430 125 – 400 70 45 4 250   /
HC60 60.00 87.00 100 – 500 134 – 534 135 – 400 90 65 5 300   /
HC80 80.00 108.00 100 – 500 150 – 550 150 – 500 90 68 6 300   /
HT Tube, snap-open from both sides HT20 20 30 40 – 100 54 – 114 75 – 180 33 5 2.6 120 /  
HT25 25 36 40 – 100 57 – 117 75 – 200 40 10 2.8 150 /  
HT35 35 56 50 – 400 74 – 424 125 – 250 60 25 3.4 200 /  
HT45 45 66 50 – 400 76 – 426 125 – 300 70 38 3.9 250 /  
HT55 55 77 50 – 400 80 – 430 150 – 400 70 45 4 250   /
HT60 60 87 100 – 500 134 – 534 150 – 400 90 65 5 300   /
HT80 80 108 100 – 500 150 – 550 200 – 500 90 68 6 300   /
XC Open, snap-open from both sides XC30 30 40 20 – 125 36 -141 55 – 200 25 3 1.6 50 /  
EC Open, snap-open from both sides EC35 35 50 20 – 125 37 – 142 75 – 250 33 8 2.2 50 /  
ET Tube, snap-open from both sides ET35 35 50 50 – 125 67 – 142 75 – 250 33 8 2.2 50 /  
To Be Negotiated 1 Piece
(Min. Order)

###

Logo Printing: with Logo Printing
Size: Various Models
Customized: Non-Customized
Type: Cable Carrier
Material: Steel
Certification: ISO 9001:2008, ISO 9001:2000

###

Customization:

###

Opening principle Series Inner height[mm] Outer height[mm] Inner width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill weight [kg/m] Max unsupported length [m] Max long travel length [m] Material of Mounting brackets
                  Plastic Steel
MC is Non snap-open. ME is Enable to open from one side MC·ME10-15 10-15 14-19 10 – 50 17 – 58 18 – 38 20 0.7-1.2 0.8-1.4 40 /  
ME20-32 20-32 25-39 15 – 80 26 – 91 28 – 180 30 1.5 1.4 50 /  
QC Split crossbar one side QC20 20 25 25 – 50 36 – 61 28 – 100 30 0.5 0.65 /
QC32 32 39 25 – 50 36 – 61 50 – 125 30 0.7 1 /
HC Snap-open from both side HC20 20.00 30.00 20 – 125 34 – 139 35 – 180 33 5 2.6 120 /  
HC25 25.00 36.00 20 – 125 37 – 142 50 – 200 40 10 2.8 150 /  
HC35 35.00 56.00 50 – 400 74 – 424 60 – 250 60 25 3.4 200 /  
HC45 45.00 66.00 50 – 400 76 – 426 75 – 300 70 38 3.9 250 /  
HC55 55.00 77.00 50 – 400 80 – 430 125 – 400 70 45 4 250   /
HC60 60.00 87.00 100 – 500 134 – 534 135 – 400 90 65 5 300   /
HC80 80.00 108.00 100 – 500 150 – 550 150 – 500 90 68 6 300   /
HT Tube, snap-open from both sides HT20 20 30 40 – 100 54 – 114 75 – 180 33 5 2.6 120 /  
HT25 25 36 40 – 100 57 – 117 75 – 200 40 10 2.8 150 /  
HT35 35 56 50 – 400 74 – 424 125 – 250 60 25 3.4 200 /  
HT45 45 66 50 – 400 76 – 426 125 – 300 70 38 3.9 250 /  
HT55 55 77 50 – 400 80 – 430 150 – 400 70 45 4 250   /
HT60 60 87 100 – 500 134 – 534 150 – 400 90 65 5 300   /
HT80 80 108 100 – 500 150 – 550 200 – 500 90 68 6 300   /
XC Open, snap-open from both sides XC30 30 40 20 – 125 36 -141 55 – 200 25 3 1.6 50 /  
EC Open, snap-open from both sides EC35 35 50 20 – 125 37 – 142 75 – 250 33 8 2.2 50 /  
ET Tube, snap-open from both sides ET35 35 50 50 – 125 67 – 142 75 – 250 33 8 2.2 50 /  

Three important aspects of the drive chain

One of the advantages of a drive chain is that it is relatively light. It sends nearly all of the engine’s power to the rear wheels, even if it loses some power along the way. Engine power on a dyno is different than on the road. Therefore, the chain is the most efficient way to transmit power to the rear wheel. Let’s look at three important aspects of the drive chain. Here are some facts about them.

roller chain drive

When choosing a roller chain drive, consider your application and how much horsepower your system requires. For applications requiring more horsepower, a multi-strand drive is an option. If your horsepower is limited, single-strand drives are a good choice. Otherwise, you may need to choose the smallest pitch chain. However, this may not always be possible. You should also consider sprocket size. In many cases, choosing a smaller chain pitch can increase the number of options.
While proper lubrication and maintenance can last a roller chain drive for years, regular inspections are essential to prolonging its life. After the drive has been operating for 100 hours, a thorough inspection every 500 hours is recommended. During this inspection, look for key elements such as 3% elongation and chain wear. If the chain is not preloaded, elongation will happen very quickly. In either case, the industry-recommended 3% elongation will be achieved faster.
chain

flat top chain

The flat-top chain system consists of hinge pins that support the chain to ensure efficient conveying. There are different types of hinge pins available, namely single and double. The single hinge pin is suitable for short chainplates and lightly loaded products. Dual hinge pins provide increased stability and load capacity. Flat top drive chains can be used in many different industries. In this article, we will learn about some important properties of flat-top chains.
Plastic flat top chains can transport medium to large workpiece pallets. They have a circular arc function that enables continuous drive combinations involving curved circular arcs. Plastic flat top chains are also recommended for workpiece pallets with PA wear pads. Steel flat-top chains can withstand surface loads up to 1.5 kg/cm, and HD profiles are suitable for steel chains. This chain is used in a variety of applications, including packaging machines.

mute chain

There are several types of mufflers that can silence your drive chain. One is the Ramsay silent chain, also known as the inverted tooth chain. These chains can be custom designed for specific needs. Exclusive Australian distributor of CZPT products that can help you find the most effective and affordable silent chain. In addition to silent chains, CZPT also manufactures sprockets and other hardware required for the drive.
Another type of mute chain is the CZPT chain. CZPT chains have involute teeth, while the ANSI standard specifies straight teeth. The advantage of silent chains is reduced noise and vibration output, and wider chains are more economical than multi-strand roller chains. The downside of silent chains is that they wear out quickly without lubrication.
The mute chain consists of two main parts, the pin and the plate. The pins are rotated in the same direction and positioned so that they can only engage the sprocket from one direction. Therefore, mute links are not recommended for reverse applications. To find out if your chain will work in reverse, consult the manufacturer’s catalog. CZPT chain.

conveyor chain

Drive chains and conveyor chains are essentially the same, but they are very different. The transmission chain is mainly used to transport heavy objects, and the conveyor chain is used to transport light objects. On the other hand, drive chains are usually driven by belts. Both types of chains can be used for the same purpose. This article will cover both types of chains. You can use them to convey various types of materials and products.
There are some differences between belts and chains, but both types can perform similar functions. The drive chain is used to drive the rollers, while the belt is used to move the object horizontally. The drive chain usually drives the rollers that move the conveyor belt. For a wide range of applications, conveyors and drive chains can be customized to meet specific needs. Here are some common uses of these two chains:
chain

time chain

Timing chains fail for two reasons: complete damage and fatigue. Fatigue occurs when a timing chain reaches its breaking strength, and eventually, failure occurs when a timing chain exceeds its design life and suffers mechanical damage. Most timing chain failures are a combination of mechanical failure and fatigue. Chain chatter, engine misfires, and VVT systems can accelerate chain fatigue. If these causes of premature timing chain failure are not addressed, the timing chain could be permanently damaged.
In the past, the timing chain was the only drive chain available. Timing belts are a quieter alternative, but they are prone to failure and damage to valves and the engine. In recent years, OEM manufacturers have begun to return to the OHC/DOHC drive chain of the timing chain. This type of drive chain has many advantages, including the ability to simulate knock sensor vibrations. Additionally, the chain has better NVH performance, making it the drive chain of choice for automakers.

Timing Chains in Internal Combustion Engines

Internal combustion engines use timing chains to control intake and exhaust valves. The chain turns the camshaft at the right time and coordinates the movement of the valves on the cylinder head. This in turn allows the engine to generate power. The timing chain also controls the position of the intake and exhaust valves, ensuring that fuel and exhaust gases are expelled at the correct time. Incorrect timing in the vehicle can lead to misfires and other problems.
Chain drives in internal combustion engines are a common feature of many modern cars. It transmits rotational force from the crankshaft to the camshaft, which in turn controls the opening and closing of valves. The chain is lubricated with oil to prevent wear. Therefore, timing chains are often used in high-capacity engines, including trucks and motorcycles. But they do have some drawbacks.
A weakened timing chain can cause the engine to misfire, causing it to skip gears and lose coordination. A clicking sound may also indicate a problem. If the chain is too loose, it can also cause the engine to stall. If the chain is too loose, metal chips will appear in the oil. A clicking sound may also be heard when the engine is running. If you hear the engine stalling, it’s likely that the timing chain is the culprit.

Silent chains in internal combustion engines

The pitch difference between the drive sprocket and the silent chain reduces resonance sound, meshing shock, and accelerated wear at the chain and sprocket interface. The difference in pitch between the drive sprocket and the silent chain determines the loudness of the sound, and the system described here helps reduce it. The present invention is suitable for power transmission in internal combustion engines.
The earliest designs for silent chains come from the 1500s when Leonardo da Vinci sketched them. The SS Britannia propels the boat across the Atlantic using huge silent chains. By the mid-19th century, silent chains were used in nearly all types of industrial applications and as timing chains for early automobile engines. Due to their durability, these chains are durable and have smooth action.
In order to understand the mechanism of frictional losses in chains, various parameters must be considered. Speed, pitch, temperature and tension are the main parameters affecting friction loss. This test uses two types of chains to compare the frictional behavior between these two components. The results show that a single chain with a high pitch can increase the friction torque of another chain with the same pitch. These results provide an important basis for understanding the role of friction torque in internal combustion engines.
chain

lifting chain

Lift chairs are designed to lift heavy objects and can be used with a variety of lifting equipment, including forklifts and cranes. Hoist chains are also used in warehouses and ports of all sizes and consist of a series of pins and plates that mesh with each other to move heavy loads. ​​​CZPT Chain manufactures high-precision lifting chains. Here are some of the benefits of hoist chains for drive chains.
Blade Chain: This type of drive chain has a patented U-profile that turns the flexible chain into a highly stable outer post during the push phase. This design is designed to minimize linkage tangling and provide better pressure transfer. These chains are used for cranes, anchors and straddle carriers. Blade chains are more durable than other types of drive chains and are especially useful in heavy duty applications.
The drive chain is also available in a variety of materials. For example, square link chains are commonly used in cranes and hoists. They are cheap to manufacture but more prone to overloading. Conveyor chains are specially designed for chain conveyor systems. It consists of a series of interconnected rectangular links. Oval links tend to kink and are usually only used at low speeds.

China Kgg Cable Drag Chains for Construction Machinery Hc55 Series     a2040 roller chainChina Kgg Cable Drag Chains for Construction Machinery Hc55 Series     a2040 roller chain
editor by czh 2023-01-17

drive chains

As one of leading drive chains manufacturers, suppliers and exporters of mechanical products, We offer drive chains and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of drive chains.

Recent Posts